Welcome visitor you can log in or create an account

simpleflexdownload 1

3 Ply Aluminum Foil Duct Hose 100% Leak Proof

- Class 1 air duct
- Resists up to 20" static pressure
- 100% leak proof
- Kink proof and corrosion resistant
 

Also available in an insulated or acoustic form (for sound absorption) with poly jacket or aluminum foil vapor barrier

Click to see technical specifications.

rplRegular (RPL)- Construction: High-Medium-Low pressure - Uninsulated Flexible air ducts used to connect supply air ducts to air distribution outlets are constructed of 3 ply aluminum foil, to total 45 microns thick (.009 mil) and are tested up to 20" S.P. The inner, middle, and outer plys incapsulate a springsteel helix and contain no openly dangerous constituents such as mylar (plastic) or neoprene. Each length of flexible conforms to and is ULC labelled to the National Building Code Standard / Part 6.2.3.2(4).

Standard of acceptance: SIMPLEFLEX® RPL as provided by Trans Continental Equipment Ltd. Montreal - Toronto

rigInsulated Grey (RIG) - Construction: High-Medium-Low pressure - Insulated The inner core of SIMPLEFLEX® RIG is covered by 1-1 1/2” of insulation with an overlap of two to four inches of non-carcinogenic Textrafine® insulation (R 4.2). This is then covered with an air tight poly grey vapor barrier 16 microns thick (.003mil). Tested up to 20" S.P. Each length of flexible conforms to and is ULC labelled to the National Building Code Standard / Part 6.2.3.2(4). 

Standard of acceptance: Pre-insulated SIMPLEFLEX® RIG as provided by Trans Continental Equipment Ltd. Montreal-Toronto

riaInsulated Aluminum (RIA)Construction: High-Medium-Low pressure - Insulated The inner core of SIMPLEFLEX® RIA is covered by 1-1 1/2” of insulation with an overlap of two to four inches of non-carcinogenic Textrafine® insulation (R 4.2). This is then covered with an air tight aluminum foil vapor barrier 31 microns thick (.006mill). Tested up to 20" S.P. Each length of flexible conforms to and is ULC labelled to the National Building Code Standard / Part 6.2.3.2(4).

Standard of acceptance: Pre-insulated SIMPLEFLEX® RIA as provided by Trans Continental Equipment Ltd. Montreal -Toronto

ragAcoustic Grey (RAG) - Construction: Low pressure - Accoustic - Insulated The inner core of 3 ply aluminum foil perforated SIMPLEFLEX® RAG 45 microns thick (.009 mil.), is covered by 1-1 1/2” of insulation with an overlap of two to four inches of non-carcinogenic Textrafine® insulation (R 4.2) which is then covered with an air tight grey poly vapor barrier 16 microns thick (.003mil).  

Standard of acceptance: Pre-insulated SIMPLEFLEX® RAG as provided by Trans Continental Equipment Ltd. Montreal - Toronto

raaAcoustic Aluminum (RAA) Construction: High or Low Pressure - Accoustic Silencer Where flexible silencers shall be used. The inner perforated core and outer core are 3 ply aluminum foil each, to total 6 ply (114 microns) (.0228 mil.) thick. 1 1/2-2” of insulation is used in between the inner and outer core. The total duct is all a one piece construction requiring no screws, rivets or sealer in its composition. No potentially dangerous constituents such as mylar (plastic) or neoprene shall be exposed to the inner and outer layers. Tested up to 4" S.P.

Standard of acceptance: Pre-insulated SIMPLEFLEX® RAA as provided by Trans Continental Equipment Ltd. Montreal - Toronto

 

Log in or create an account